English
Views: 0 Author: Site Editor Publish Time: 2025-07-18 Origin: Site
Wood-Plastic Composite (WPC) is a mixed material. It blends natural fibers with plastic. A top-notch WPC has a balanced mix. This ensures it lasts long, stays strong, and is kind to the environment. According to MexyTech's technical data sheet, their WPC contains 65% natural fiber, 30% recycled PE plastic, and 5% additives. These parts work together. They provide strength and support green practices by using recycled stuff.
The quality of WPC depends on the plastic and wood used. Recycled plastics need careful cleaning to remove dirt. Wood fibers should be ground finely. This helps them spread evenly in the mix. A steady and well-blended formula boosts performance. It resists water, stays stable under sunlight, and holds up mechanically.
Making WPC product the same every time is key. It ensures each product works as promised. Changes in raw materials or production can cause problems. These include warping, cracking, or uneven fading. MexyTech tackles this with dust removal systems. They also use strict quality checks during production. These steps remove impurities that weaken the material. They ensure every batch is uniform.
Safety matters for outdoor uses like decks or fences. Good slip resistance prevents accidents in wet or oily conditions.
This test mimics walking barefoot on wet surfaces. It checks real-life safety. MexyTech's WPC reached an angle of insecurity at 25°. This earns it Group C, the top rating for barefoot safety.
This test checks how surfaces handle oily conditions. It measures the angle where slipping starts. MexyTech's WPC scored R10 in the length direction (15°) and R11 in the width direction (19°). These results show great slip resistance, even with oil.
This test uses a swinging arm with rubber sliders. It imitates a heel hitting the floor. MexyTech's WPC achieved an average SRV (Slip Resistance Value) of 95 dry in both machine and cross directions. This qualifies it for P5, the highest safety rating under AS 4586-2013 standards.
Outdoor materials must endure long sun exposure without breaking down.
In artificial weathering tests based on EN 15534-1:2014 Section 8.1 & EN 927-6:2006, MexyTech's WPC kept a grey scale rating of 4.5 after 2000 hours. This shows little color change and strong UV durability.
For a tougher check, ASTM G154-23 was used. It ran a long cycle test. After 3000 hours under UVA-340 lamps, MexyTech's samples showed only slight color changes. Grey scale ratings stayed at level 4–5 throughout.
Water absorption can cause swelling or warping over time.
In this test, samples sit in boiling water. It mimics extreme wet conditions. MexyTech's average water absorption was only 1.8%. This is well below the 7% limit set by EN standards.
Durability against wear matters in busy areas.
Using ASTM D4060-14 with CS-17 wheels under a 1kg load for 2000 cycles, MexyTech's average abrasion loss was just 29.55mg/1000r. This shows strong resistance to surface wear over time.
In Europe, WPC products must pass certain tests. These make sure the products are safe, strong, and good for different jobs. The tests check how WPC handles water, sunlight, and wind. These are big deals for things used outside. The main rules focus on water resistance, UV stability, and wind resistance.
One big test in Europe is the water immersion test. It sees how well WPC stands up to water over time. European rules say WPC must be soaked in water at 60°C for a certain time. This copies what happens when WPC gets wet in real life.
MexyTech goes further. They test their WPC decking in water at 90°C. That's 50% hotter than Europe's rule. This tough test makes sure MexyTech's products fight off water damage well. They're great for places with bad weather. This high bar shows MexyTech cares about making top-quality stuff.
Sunlight resistance is super important for WPC used outside. The sun's UV rays can fade colors, crack surfaces, or weaken materials. In Europe, WPC must handle 2000 hours of UV light. This makes sure they don't break down under the sun.
MexyTech does more. They test their WPC products like WPC fence for 3000 hours under UV light. That's way longer than Europe asks for. This means their products stay strong in the sun for a long time. MexyTech also promises their colors stay bright, with a rating of 4 to 5 on the scale. Their WPC keeps looking good and stays tough, even in strong sunlight.
MexyTech beats this. Their WPC products hit Level 9 for wind resistance. This makes them perfect for stormy places. They stay strong and keep their look, even in rough winds. This gives builders and homeowners confidence in tough weather.
MexyTech products passed CE Certification ISETC.001420210624. This proves they meet European rules for safety, health, and environmental care.
Green labels show low emissions of harmful substances like formaldehyde or heavy metals. MexyTech's formaldehyde emission is less than 0.02 mg/m³. This meets E0, the lowest level, ensuring safer air quality near living spaces.
MexyTech uses up to 30% recycled PE plastic mixed with natural fibers. This cuts down on new resource use. Their dust extraction system keeps production clean. It leads to better-quality products.
MexyTech's Customization Service lets clients pick sizes, colors, textures, and even laser-cut patterns. This meets unique project needs. Every batch passes in-house tests before shipping.
MexyTech has set up a 4-person independent quality inspection team to review materials in the early stage, conduct random inspections in the mid-term to ensure that the goods are consistent with the order, and conduct inspections in the later stage according to detailed inspection standards to ensure the delivery of qualified high-quality products and provide data-based quality inspection reports.
Their business team visits different countries every year to deeply explore and understand local market needs, and invests the information learned in R&D and innovation. New products, new processes, and new design concepts are launched every year to help customers seize market opportunities.
High-quality WPC mixes natural fibers with recycled plastics. This makes it stronger and greener. It resists fading, cracking, and water damage. Regular plastic fencing may wear out faster outdoors.
Check for certifications like P5 from pendulum tests or R11 from oil-wet ramp tests. These show top safety for wet areas like pools or gardens.
Not much, if it's high-quality co-extruded material. Tests like ASTM G154 show grey scale ratings above level 4, even after thousands of hours of UV exposure.
Not always. Look for FSC certification or low formaldehyde emissions (E0 level). Products with recycled plastics also help the environment.
Yes! Many suppliers offer options for panel size, texture, color, and even laser-cut patterns to fit your space.
If you want great WPC for your next project, MexyTech is the best choice. They come up with new ideas every year and have over 10 patents annually. MexyTech leads the way in outdoor building materials. Find out how they can make your projects better with WPC that goes beyond what you expect.
