English
Views: 0 Author: Site Editor Publish Time: 2026-02-12 Origin: Site
A perfectly flat ground is a rarity. Whether you’re working on a rooftop terrace, backyard patio, or a commercial boardwalk, surface irregularities and drainage requirements make traditional deck installations time consuming and messy. The combination of quick install WPC decking and adjustable pedestal systems like MexyBase offers a clean, tool free, and fast solution for both installation and removal—without leaving behind screw holes or construction scars.
Wood Plastic Composite (WPC) decking blends recycled wood fibers with polymers to create an outdoor flooring material that resists moisture, insect damage, and warping. The core layer is a wood plastic composite, 50% recycled wood fiber and 30% polypropylene (PP). It doesn't crack or splinter like natural wood, and it doesn't require painting or sealing. That's a huge benefit for anyone who wants an outdoor space that looks great with minimal upkeep.
Thanks to its weather resistant outer layer—often made using high performance materials like Surlyn resin—WPC decking remains color stable and scratch resistant even under harsh sunlight or heavy foot traffic. The surface layer is made of Surlyn resin, the same material used in golf balls, which is 200% more scratch resistant and weather resistant than PE.
Speed and simplicity are no longer luxuries—they’re expectations. Contractors want faster turnover. DIYers want projects they can tackle over a weekend without calling in reinforcements.
Quick install systems offer:
· Faster build time
· Less noise and dust on site
· Lower labor costs
· Reduced risk of errors (no overdriven screws or warped boards)
MexyTech's ZipDeck system is three times faster than traditional methods, meaning you can complete a floor installation in just one-third the time of traditional methods. Key technologies for rapid installation and removal.
MexyTech’s ZipDeck stands out because it’s not just fast—it’s engineered for reversibility.
The tool free snap fit system features a two way locking design: simply press to secure or remove a board, and a single board replacement takes only 30 seconds. There’s no need for drills or screws. Each board clicks into place via a slide and lock mechanism, locking securely while allowing for future removal.
And since no screws are visible on the deck surface, the result is seamless in both function and appearance. The absence of screw holes makes it suitable for temporary event spaces.
ZipDeck’s design recognizes that fast installation shouldn’t mean permanent locking. Boards can be removed without prying or damage—useful when:
· Inspecting drainage membranes
· Cleaning debris buildup
· Replacing a damaged board
1. Plan Layout: Start with perimeter lines and slope direction for drainage.
2. Place Adjustable Pedestals: These support the aluminum joists and allow slope correction.
3. Slide in Deck Boards: Click them into pre installed grooves—no drilling, no mess.
4. Final Checks: Confirm alignment, spacing, and surface flatness.
· Use straight edge tools to maintain consistent gaps.
· Ensure full engagement of each locking clip.
· Pay extra attention to perimeter stability with proper edge finishing.
It’s not just about installation speed—decks need to be maintained too. You might need to remove boards when:
· Swapping out damaged planks
· Cleaning out leaves or dirt below
· Checking waterproof layers on rooftops
· Making layout changes
1. Locate the service zone or start from the nearest edge.
2. Identify the board’s lock direction (ZipDeck uses horizontal sliding).
3. Slide board out at its release point—no tools required.
4. Replace or return the board after task completion.
The patented buckle has a tensile strength of ≥800N (ASTM D1761 standard), ensuring long term stability.
Avoid brute force—don’t pry from random points. Work from known service access areas when possible and always keep extra clips handy on site in case one gets lost or damaged.
Minor damage doesn’t require major reconstruction anymore.
With ZipDeck:
· A single board can be swapped in 30 seconds
· Neighboring boards remain untouched
· No screw removal required
Flexible maintenance: Damaged plates can be partially replaced, reducing maintenance costs.
Because neither screws nor glue are used, boards can be reused multiple times across different projects. This reduces waste during renovations and keeps material usage efficient over the product’s life.
Quick install WPC decking is ideal for:
· Rooftop terraces
· Balconies
· Backyards
· Pool surrounds
Homeowners love that they can DIY install it with no power tools—and if they move, they can take it with them.
In public or business settings:
· Hotels
· Cafés with outdoor dining
· Pop up events
· Walkways in parks or gardens
The quick repair capability dramatically reduces downtime. Commercial projects reduce labor costs by 40%; no specialized carpenters are required, ordinary workers can operate the equipment.
Quick install WPC decks remove the need for:
· Screws and drills
· Skilled labor for complex fastening
· On site measuring errors
Fewer consumables = less cost and less waste.
No visible fasteners = cleaner look.
And with engineered locking systems, board spacing remains uniform across seasons—no warping, no shifting. The concealed installation system has no screw holes and is suitable for temporary event spaces.
WPC decking materials already benefit the environment by reusing wood fibers and plastics. But fast install systems add another green layer. The reusable snap fit design allows for low waste refurbishment and maintenance.
Boards can be reused again and again without degradation. And because there’s no damage during disassembly, fewer parts end up in landfills.
Yes, it uses a tool free locking system that allows manual installation and removal.
With ZipDeck, installation time is reduced by up to 67% compared to traditional methods.
No, individual boards can be removed without disturbing surrounding ones.
Yes, especially when combined with an adjustable pedestal base like MexyBase.
Absolutely. They can be uninstalled and reinstalled multiple times with no damage.
